THREE-DIMENSIONAL ANALYSIS OF A MAGNETOELECTROELASTIC HALF-SPACE UNDER AXISYMMETRIC TEMPERATURE LOADING 1)

考虑力-电-磁-热等多场耦合作用, 基于线性理论给出了磁-电-弹性半空间在表面轴对称温度载荷作用下的热-磁-电-弹性分析, 并得到了问题的解析解. 利用Hankel 积分变换法求解了磁-电-弹性材料中的热传导及控制方程, 讨论了在磁-电-弹性半空间在边界表面上作用局部热载荷时的混合边值问题, 利用积分变换和积分方程技术, 通过在边界表面上施加应力自由及磁-电开路条件, 推导得到了磁-电-弹性半空间中位移、电势及磁势的积分形式的表达式. 获得了磁-电-弹性半空间中温度场的解析表达式并且给出了应力, 电位移和磁通量的解析解. 数值计算结果表明温度载荷对磁-电-弹性场的分布有显著影响. 当温度载荷作用的圆域半径增大时, 最大正应力发生的位置会远离半无限大体的边界; 反之当温度载荷作用的圆域半径减小时, 最大应力发生的位置会靠近半无限大体的边界. 电场和磁场在温度载荷作用的圆域内在边界表面附近有明显的强化, 而磁-电-弹性场强化区域的强化程度跟温度载荷的大小和作用区域大小相关. 本研究的相关结果对智能材料和结构在热载荷作用下的设计和制造具有指导意义.     

ELASTIC PULSE BUCKLING OF CYLINDRICAL SHELLS UNDER RADIAL IMPULSIVE LOADING

ＥＬＡＳＴＩＣＰＵＬＳＥＢＵＣＫＬＩＮＧＯＦＣＹＬＩＮＤＲＩＣＡＬＳＨＥＬＬＳＵＮＤＥＲＲＡＤＩＡＬＩＭＰＵＬＳＩＶＥＬＯＡＤＩＮＧＨｕａｎｇＣｈｅｎｇｙｉ（黄承义）ＬｉｕＴｕｇｕａｎｇ（刘土光）ＺｈｅｎｇＪｉｊｉａ（郑际嘉）（Ｄｅｐａｒｔｍｅｎｔｏ...     

Interfacial crack between elastic half-spaces under harmonic loading

A system of boundary integral equations that allows evaluating the displacement and stress fields for an interfacial crack under harmonic loading is presented. Expressions for the integral kernels are obtained. A numerical solution for a penny-shaped crack between steel and aluminum half-spaces under normally incident compression-rarefaction wave is given __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 8, pp. 47–56, July 2007.     

Viscous waves and wave-structure interaction in a tank using adapting quadtree grids

Viscous waves and waves over a submerged cylinder in a stationary tank are simulated using a volume-of-fluid numerical scheme on adaptive hierarchical grids. A high resolution interface-capturing method is used to advect the free surface interface and the Navier–Stokes equations are discretised using finite volumes with collocated primitive variables and solved using a Pressure Implicit with Splitting of Operators (PISO) algorithm. The cylinder is modelled by using the technique of Cartesian cut cells. Results of flow of a single fluid past a cylinder at Reynolds number Re=100 are presented and found to agree well with experimental and other numerical data. Viscous free surface waves in a tank are simulated using uniform and quadtree grids for Reynolds numbers in the range from 2 to 2000, and the results compared against analytical solutions where available. The quadtree-based results are of the same accuracy as those on the equivalent uniform grids, and retain a sharp interface at the free surface while leading to considerable savings in both storage and CPU requirements. The nonlinearity in the wave is investigated for a selection of initial wave amplitudes. A submerged cylinder is positioned in the tank and its influence on the waves as well as the hydrodynamic loading on the cylinder is investigated.     

A NEW CYCLIC J-INTEGRAL FOR LOW-CYCLE FATIGUE CRACK GROWTH

The constitutive equation under the low-cycle fatigue (LCF) was discussed, and a two-dimensional (2-D) model for simulating fatigue crack extension was put forward in order to propose a new cyclic J-integral. The definition, primary characteristics, physical interpretations and numerical evaluation of the new parameter were investigated in detail. Moreover, the new cyclic J-integral for LCF behaviors was validated by the compact tension (CT) specimens. Results show that the calculated values of the new parameter can correlate well with LCF crack growth rate, during constant-amplitude loading. In addition, the phenomenon of fatigue retardation was explained through the viewpoint of energy based on the concept of the new parameter.     

A Novel Fluid Structure Interaction Experiment to Investigate Deformation of Structural Elements Subjected to Impulsive Loading

This paper presents a novel experimental methodology for the study of dynamic deformation of structures under underwater impulsive loading. The experimental setup simulates fluid–structure interactions (FSI) encountered in various applications of interest. To generate impulsive loading similar to blast, a specially designed flyer plate impact experiment was designed and implemented. The design is based on scaling analysis to achieve a laboratory scale apparatus that can capture essential features in the deformation and failure of large scale naval structures. In the FSI setup, a water chamber made of a steel tube is incorporated into a gas gun apparatus. A scaled structure is fixed at one end of the steel tube and a water piston seals the other end. A flyer plate impacts the water piston and produces an exponentially decaying pressure history in lieu of explosive detonation. The pressure induced by the flyer plate propagates and imposes an impulse to the structure (panel specimen), which response elicits bubble formation and water cavitations. Calibration experiments and numerical simulations proved the experimental setup to be functional. A 304 stainless steel monolithic plate was tested and analyzed to assess its dynamic deformation behavior under impulsive loading. The experimental diagnostic included measurements of flyer impact velocity, pressure wave history in the water, and full deformation fields by means of shadow moiré and high speed photography.     

宽音频扫描加载的电子剪切散斑技术在多层粘接板结构无损检测中的应用

本文利用宽音频自动扫描加载的电子剪切散斑干涉技术对多层粘接板结构进行了时实检测，结果表明，这种方法能够同时测定板的多个位置、大小和形状各不相同缺陷，迅速准确地对多层粘接板结构质量作出判断，同时根据到试过程中记录的共振频率等各种信息，可以进一步对被测部分的振动位移及缺陷深度进行定量分析．     

冲击载荷形状对阻尼介质中结构最终塑性变形的影响

分析了在阻尼介质中当保持相关参量相同时，冲击载荷形状对简支刚塑性圆板和圆柱薄壳的最终塑性变形的影响。在结构物高载阶段的运动中，考虑了阻尼介质对塑性铰区移行的影响。结果表明:在阻尼介质中，文献［６］中相关参量的概念仍然可以沿用，但结构的最终塑性变形与相关参量的关系式Ｗ＿ｏｆ＝Ｉ￣２＿ｅＧ（Ｐ＿ｅ）应由更一般的表达式来代替。     

纯铝在单轴应力循环作用下棘轮行为的试验研究

对纯铝进行了单轴应变控制和应力控制下的系统循环试验。对纯铝应变循环下的循环应变幅值、应变幅值历史、平均应变对循环特性的影响进行了揭示，对纯铝在非对称应力循环下的应力幅值、平均应力及其历史对循环蠕变〈即棘轮〉的影响进行了分析，得到了纯铝单轴循环行为的一些有意义的结果。     

Transient response of a finite crack in an orthotropic strip under the in-plane shear impact

The transient response of a central crack in an orthotropic strip under the in-plane shear impact loading is studied by using the dual integral equation method proposed by Copson and Sih. The general formula for the shear stress intensity factor near the crack tip is derived. Numerical results of with in various cases are obtained by solving the second kind Fredholm integral equation and by performing the inverse Laplace transform.